Maxtor 4-Channel DVR (Digital Video Recorder) Uživatelský manuál

Four Channel Digital Video Recorder Models: DGR104 Installation / User Manual Digimerge Technologies Inc.

Accessing the Main Menu The Menu allows you to configure your DVR settings and program various recording options. Follow these steps in order to acc

System Set Up The system menu is used to configure the system level options of the DGR104… To access the System features, press MENU followed by the

Setting the Alarm Duration To set the duration of the Alarm: 1. On the System screen, press ▲ / ▼ to select Alarm Duration, then press ENTER. 2. Pre

Changing the System Password 1. On the System screen, press ▲ / ▼ to select New Password, then press ENTER. 2. Press ▲ / ▼ to choose a number, then

The remote connection on the DVR uses 8 data bits, 1 start bit, and 1 stop bit, no Parity. Below is an example of the data stream with the control c

7. Press ◄ / ► move location to Timer EnableYes or No setup YES : To confirm Timer EnableScheduling Timer Record feature NO : To confirm no Timer E

Record Settings On the Main menu, selecting the Record option will allow you to set the quality and speed of recordings. (Menu) Timer ► Record Alarm

Camera Channel Setup To access the Camera option, press MENU followed by the 4-digit password. Use the ▲ / ▼ to scroll to the Camera option and press

Record Method This feature is used to select the DVR record method as either EVENT / NORMAL / OFF. 1. Press ▲ / ▼ to select the desired time camera

Motion Detection The Motion Detect feature provides a visual indication on the monitor when movement is detected in the picture. Note that this does n

Under the copyright laws, this documentation may not be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-r

Figure 1-1 MOTION DETECTION SETUP – 1~4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 032

Event Log Viewing To access the Event Log Viewing option, press MENU followed by the 4-digit password. Use the ▲ / ▼ to scroll to the Event option an

Operation On Screen Display (OSD) The DGR100/101 will display all current status on the OSD. 2002 – JAN –01 01:02:03 E 32GB He

Picture in Picture (PIP): This button is used to configure the monitor so a full screen is displayed in the background with a 1/16th size screen ins

Slow reverse Press PLAY on the front panel, then press SLOW for slow forward. Press REW/◄ to play images slowly forward (1/2X). Press REW/◄ again to

Troubleshooting Check that the HDD has been installed correctly No recorded video Check camera’s video cables and connections Check monitor’s vid

Technical Specifications Video format NTSC/EIA or PAL/CCIR HDD storage IDE type, UTMA 66 above, 2 removable HDD’s supported Record mode Manual /

Appendix 1: Installing the HDD NOTE: The HDD has the same purpose in a DGR104 as a videocassette does in a VCR. However, installing the HDD is a b

27 B (unlocked)A (locked)Step 6: Secure the HDD in the cartridge casing. Position the HDD into place and secure it using the six screws suppli

Appendix 2: Connection Diagram to Cameras and Monitor 28

Table of Contents Important Safety Instructions...

Appendix 3: Pin Configurations 9 pin Comm Port 25 Pin Comm Port 29

Pin References for RS-232 / Alarm Block PIN 1. GND GROUND PIN 18. ALARM INPUT 1 Used to connect an alarm sensor between ALARM INPUT 1 (PIN 18) and

Appendix 4: Rack Mount Installation Screws and brackets for rack mounting applications can be purchased as an optional accessory. Front Angle with

Appendix 5: Recording Times (in Hours) NTSC SYSTEM IPS 25A 15 8 4 2 1 Best 16hr 32hr 60hr 120hr 240hr 480hr High 20hr 40hr 75hr 150hr 300h

33 Appendix 6: RS232 Remote Protocol The RS-232 protocol allows you to control the DGR104 from a PC or any other serial device. Data: 8 bit data, 1

Appendix 7: Compatible HDD Brands Manufacturer Model CapacityRotationHITACHI Deskstar 180 GXP (120 GB) 120GB 7200 rpmHITACHI Deskstar 7K250, HDS7225

Limited Warranty Warranty: Subject to the exclusions and limitations below, Digimerge warrants to the initial end-user purchaser that the product wi

Digimerge Technologies Inc. 300 Alden Road Markham Ontario L3R 4C1 www.digimerge.com rev04

Important Safety Instructions All the safety and operating instructions should be read before operating this equipment. The improper operation may c

Introduction The DGR104 combines a 4 channel multiplexer with a Digital Video Recorder (DVR). The DVR offers many advantages over traditional time l

System Contents The DGR104 box should include the items listed below. Please take a moment to verify that no items are missing from the package.

Front Panel Controls 17 14 13 217 15 10 1112 98765431 1. REMOVABLE HDD CARTRIDGE Please refer to page.19 Appendix #1. 2.

15. REC Press REC to start recording. • • • 16. SLOW To slow down speed of play mode. 17. CAMERA SELECT (1-4) Press the Camera Select (1-4) to se

Back Panel 1. POWER INPUT Connects to the Power cord. 2. EXTERNAL I/O Connects to a PC for Remote Control via RS-232 or to an Alarm Block. (see