Maxtor 773W V1.0 Uživatelský manuál Strana 1

4 CH Digital Video RecorderUser’s Manual773W V1.0Please read this instructions thoroughly before operation and keep the manual in a safe place for fur

PLAY BACKPress “PLAY ” button, the DVR will show the last recording. 1. FAST FORWARD (F.F.) & FAST REWIND (F.R.)You can increase the speed of Fast

8There are 12 options available in the Main Menu:TIMER ----------Program Timer RecordingCAMERA -------Camera SetupRECORD -------Recording Mode SetupA

8. MESSAGE LATCHTo select whether the DVR messages will disappear after 10 seconds or remain on screen. NO is the default setting which themessages wi

2. STARTSet the time to start the recording.3. ENDSet the time to end the recording.4. IPS (IMAGE PER SECOND)NTSC－30、15、8、4、2、1PAL－25、12、6、3、2、15. QUA

113. REC (RECORD)Set up which channel you want to record. ON : when alarm input is triggered, DVR will record alarming channel more frequently. For e

12(PIP)FULL SCREEN CAM 1PIP SCREEN CAM 2POSITION D/R(DWELL)NORM ALARM CAM1 01 01CAM2 01

3. RE (REFERENCE)Set the Reference image to which the current screen is compared (from 1-99). For example, the value 64 would compare the current imag

14Figure 1-2 MOTION DETECTION SETTING — ROW SETUPFigure 1-1 MOTION DETECTION SETUP1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1612345678911121 2 3 4 5 6 7 8

15DISPLAY1. TITLE DISPLAYTo set the title shown on monitor or not.2. OSD COLORSelect the OSD (On Screen Display) color. The options are YELLOW, GREEN,

USER1. USER To set up the user account for controlling. Itallows 8 users setting.Supervisor – Control all the functions.Other Users – View all functio

The lightning flash with arrowhead symbol, within an equilateraltriangle, is intended to alert theuser to the presence of uninsulated"dangerous

17Hardware CONNECTION AT SERVER SITENetwork Setting Guide

18STEP1: Software installation1.Put the attached CD into a CD-ROM and it will start to install the application program into PC.2. Press “Next”.STATIC

4.Set program shortcuts setting and press “Next”.5.Press “Next” to begin to copy files6.After the installation, there are 6 files and 1 folder in you

20Step2 : Static IP setting In DVR MENU / NETWORK set SERVER IP, GATEWAY, NET MASK, DNS andWEB PORT which are provided from your local ISP ( interne

21Click twice and enter your User name, Password (Note: If you never change the “Account” before, the User Nameand Passwordare both “admin

DYNAMIC IP SETTING223.Choose destination location and press “Next”.Step1 : Software installation1.Put the attached CD into a CD-ROM and it will start

4.Set program shortcuts setting and press “Next”.5.Press “Next” to begin copying files236.After the installation, there are 6 files and 1 folder in y

Step2 : DDNS apply1. Click on free site “http://www.dyndns.org” (please look at the example below, you can also apply DDNS in other DDNS web page) and

3. Register the information and click on “Create Account”4.After registering your account, you will receive an e-mail, which contains instructions to

6.Click on“Account” and “Add Host”7 Users can set up their own DDNS HOST. For example, the user’s applied Host nameis “avtech.dyndns.org”. And then p

What do you get ?• FEATURES ---------------------------------------------------------------------------------------• PACKAGE CONTENT -----------------

2. Network setting for PC. (The instruction is based on Win XP O/S. If your O/S is Win 2000 or Win 2003, the setup procedure is similar to that of

4.Click on “INTERNET PROTOCAL (TCP/IP)” and then select “Properties” to setup5.Choose “Obtain an IP address automatically”6. Enter “Command Prompt”28

8. Close the window in the above step. Enter the IP address (router’s gateway : 192.168.1.1 ) to log in to the router from internet explore. And then

Step4 : Router settingNOTE : In the router setting, we have four steps as follows. 1. Dial setting2. DHCP setting3. Virtual server setting4. DDNS sett

3. In “ADVANCED SETUP / Virtual Server”. Choose “By Port” and set “Port Number” to 80 for DVR. And set “Local Server IP Address” to 192.168.1.10. P

32In DVR MENU / NETWORK set SERVER IP, GATEWAY, NET MASK, DNS andWEB PORT. (MENU)TIMERCAMERARECORDALARMDWELLPIPMOTIONDISPLAYNETWORKUSER SYSTEMEV

2. Click twice and enter your User name, Password and host(Note : If you never change the “Account”before, the User Name and Passwordare b

SOFTWARE OPERATION AT CLIENT SITEStep 1：Click twice to enter Login setup (please refer to “software installation”)Step 2：Key in “User Name” and “ Pass

Introduction of Basic Operation 1.Image transmission rate per second2.Data transmission rate3.Power4.Disconnection5.Resolution : VGA、QVGA6.Image quali

Please find a recording file in the PC and click twice on it to playback.1. On Screen Display2. Snapshot3. Stop4. Pause5. Slow (1/2, 1/4, 1/8)6. PLAY7

FEATURESDVR Features• Remote control via internet • Wavelet compression format replaces Time-Lapse VCR + Multiplexer/ Quad• 4 audio inputs / 2 audio o

ADVANCED SETTINGClick “System Config” for advanced setting.37SYSTEM CONFIGNOTE :Apply--After all setting changes, press “apply” to refresh the data.Re

1.You can get all the data from the ISP company or by mailing to the server supplier.(POP3/SMTP server)2.You should set the mail list which you wa

1.Turbo Step: Set the shift step when you shift the zone which you see during the zoom in function.PERIPHERALYou can see the default peripheralsetting

CONNECT VIDEO WEB SERVER VIA IE BROWSERStep 2：Enter IP address that you want to connect.40Step 1：Open IE browser, in Tools/ Internet Options/Security/

Step 4：After you login, you will see as below. 41Step 3：Enter your Username and Password to login Video Web Server.1.Image transmission rate per secon

VIDEO LOSSScreen will display “LOSS” in the center of display picture, if the video input is not connected properly.SEARCH1. LAST RECORDPlay the last

For advanced security, users can “Lock” the buttons on your DVR. Key-Lock prevents other people from using the system.Press “ENTER” + “MENU” at the sa

Camera Input SignalComposite video signal 1 Vp-p 75Ω BNC, 4 channels Network InterfaceEthernet (10/100 Base-T) ProtocalsTCP/IP, ICMP, SMTP, HTTP, FTP

APPENDIX #1 – INSTALL THE HDDStep 1 Connect the connector with the HDD (refer to Picture 1).Step 3 Screw the HDD to the cartridge. Before you screw

46HDD HOT SWAP FUNCTIONPlease follow the steps as following to ensure the reliability. 1)Unlock the cabinet by turning the key anti-clockwise.2)Key in

1. Connect cameras and monitor to the DVR.2. Shown below is an example of connecting the DVR to your existing Observation System.3. Install HDD (The c

APPENDIX #3– PIN CONFIGURATIONS15 pin com port ••••DVR479 pin com port DQR••••DVR

48PIN 3, 4, 5, 6 ALARM INPUTTo connect wire from ALARM INPUT (PIN 3, 4, 5, 6) to GND ( PIN 9 ) connector, DVR will start recording and buzzer will be

PAL SYSTEM NTSC SYSTEM49The Recording Time is different based on Recording Speed, Recording Quality and Recording Mode. Please refer to the following

/ + PICTURE IN PICTUREPress “ ” button for 4 CH display modes and press twice to enterPOP (Picture On Picture) function.- : Press “ - ” button can

4•FF:Play video fast forward. (Press FF button again to adjust speed as 1, 2, 4, 8, 16, 32 times) • ► : Under setup mode, it works as Rightbutton. FF

1. LANConnect DVR by LAN cable.2. EXTERNAL I/O•Controlled remotely by an external device or control system suchas Video Web Server or PC.•Alarm input,

RECORDINGThe DVR offers 4 recording modes, variety of recording modes. Refer to p.11 for advanced setting of recording speed and resolution. Under the