Maxtor SLD240 Uživatelský manuál stáhnout pdf (Strana 45)

6. Secure the driver in the rack using two

mounting screws in both the

side-mounting holes. Please don’t

tighten the screws too much, otherwise

that may damage the driver.

7. Screw the rack into the device,

screwing in all the four screws.

8. Attach

the interface connector and the

power connector to the drive. Please

note the red lining of the IDE cable

must be facing the 4-

pin power

connector.

10.

Place the mobile rack back onto the device and screw it in.

6.2 Mobile Rack

1. Make sure that the key is unlocked.

2. Pull the active-handle outward to remove the carrier body away from

the mobile rack.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 76 77

Žádné komentáře

Maxtor SLD240 Uživatelský manuál Strana 45