Maxtor 777 W V1.0 Manuál s instrukcemi stáhnout pdf (Strana 20)

20 8921ADT Instruction Manual

Conﬁguration

Gain Adjustments

Once the output mode for each AES output has been selected, the gain of

the outputs can be adjusted from – 40 to + 6 dB in the audio processor as

required. Each output can be adjusted individually or locked together in

two groups, AES 1 A and B, and AES 2 C and D.

AES Output Resolution

The output resolution for AES 1and AES 2 can be set to either 20 or 24 bits.

This is set locally during installation with on-board jumpers J13 (AES 1)

and J14 (AES 2). The jumper settings can be overridden with the remote

controls.

Output Sample Rate

The output sample rate for both AES 1and AES 2 will always default to

48 kHz for this release.

Auto Tracking

If an external tracking signal is connected to the module, the TRK IN BNC,

J11, must be jumpered on the module as an input with jumper J5 (see

Module On-board Jumper Settings on page 8). Auto tracking must also be

enabled with local or remote controls.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 57 58

Žádné komentáře

Maxtor 777 W V1.0 Manuál s instrukcemi Strana 20