Maxtor Digital Video Recorder CBC V 0.4 Uživatelský manuál stáhnout pdf (Strana 43)

Ernitec EDNS V1000 series – user manual

www.ernitec.com

V 2.2.082012

3.6.8.3 Motion Detect

This item allows users to enable or disable motion detection

function of the DVR. Select <On> to enable Motion Detect alarm

events, or <Off> to disable. If motion detection function is

enabled, it is required to define motion detection parameters

such as detection area and sensitivity settings in <Detection

Config>.

3.6.8.4 Detection Configuration

If motion detection function is enabled, it is required to define the

motion detection parameters such as detection area and

sensitivity settings. Select a channel for setting the parameters,

move the cursor to <Detection Config> and press ENTER. The

Detection Configuration menu displays as follows.

Detection Config

Detected Area Setup

Sensitivity

Block Threshold

ENTER

88%

Detected Area Setup

After selected this item, the detected area is displayed as follows.

The detection area consists of 192 (16×12) detection grids.

Use the Direction keys to move the cursor and press ENTER to

select or de-select a grid. Press MODE to select all of the grids

for detection; press MODE again to de-select all of the grids.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 89 90

Žádné komentáře

Maxtor Digital Video Recorder CBC V 0.4 Uživatelský manuál Strana 43