Maxtor Digital Video Recorder CBC V 0.4 Uživatelský manuál stáhnout pdf (Strana 65)

Ernitec EDNS V1000 series – user manual

www.ernitec.com

V 2.2.082012

Camera Setup

Analog Camera Select

Dome Protocol

Dome ID

Camera Name

Hidden

Brightness

Contrast

Saturation

Hue

CH01

None

CH1

To configure dome protocol, select a camera first and set the

communications protocol associated with dome camera using

the Direction keys and ENTER.

NOTE: The settings become effective after saving the

changes and exiting from the menu.

4.5.3 RS485 Setup

The DVR controls the domes via RS-485 communication

protocol. The RS-485 parameters in the DVR must be set to the

same parameters set in dome camera.

Users are allowed to change the RS-485 settings of the DVR.

Select <System Setup> in Main menu, then select <RS485

Setup> from the System Setup menu and press ENTER. The

following menu is displayed.

RS485 Setup

Unit ID

Baud Rate

Bits

Stop

Parity

224

9600

None

The ID number must match the ID address set by the dome. The

Unit ID is in the range of 1 to 255. Note that there cannot be any

two devices on the same bus given the same ID address, or a

conflict may occur.

NOTE: The settings become effective after saving the

changes and exiting from the menu.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 89 90

Komentáře k této Příručce

Žádné komentáře

Maxtor Digital Video Recorder CBC V 0.4 Uživatelský manuál Strana 65

Komentáře k této Příručce

Související produkty a manuály pro Digitální videorekordéry (DVR) Maxtor Digital Video Recorder CBC V 0.4